GENERAL DESCRIPTION: ICR-510 casting systems offer the convenience of one resin used with two hardeners to meet different requirements. ICR-510 uses either a fast curing hardener for casting thicknesses for up to 3/4 inch or a slower curing hardener which allows for thicker casting. In either combination, these systems contain iron filler for wear resistance. Major advantages include low mixed viscosity, no filler setting in storage, low shrinkage upon cure, self de-airing, and excellent impact resistance.
With C-201 |
With CS-202 | |
| Ratio by Weight | 100pbw to 10pbw | 100pbw to 10pbw |
| Mixed Viscosity, cps. | 11,500 | 11,600 |
| Gel Time | 50 minutes | 1.5 hours |
| Machinability | Poor | Poor |
| Color | Black | Black |
| Cured Specific Gravity | 1.76 | 1.67 |
| Hardness Shore "D" | 90 | 88 |
| Ultimate Tensile Strength, psi | 10,200 | 9,800 |
| Ultimate Flexural Strength, psi | 9,500 | 9,200 |
| Ultimate Compressive Strength, psi | 13,400 | 11,300 |
USES:
- Dies
- Core Boxes
- Foundry Patterns
- Hammer Forms
- Other