GENERAL DESCRIPTION: HAC-560 is an aluminum filled two component, high temperature, epoxy casting system. This system can be used for injection and blow mold, molding and nesting fixtures, vacuum form molds, compression and backup for metal sprayed surfaces.
| *HT-8433 (FAST) Approximately 1/2" maximum thickness | |
| Ratio by Weight | 100pbw to 10pbw |
| Ratio by Volume | 5.8 (R) to 1 (H) |
| Mixed Density | 13.75 W.P.G. |
| Mixed Specific Gravity | 1.64 grams/cc |
| Mixed Viscosity | 20,100 cps |
| Pot Life (1 lb. Mass) | 65 minutes |
| Demold Time | 18-24 hours |
| Tensile Strength | 7,700 psi |
| Tensile Elongation at Break | 2.9% |
| Flexural Strength | 13,000 psi |
| Flexural Modulus | .44 x 106 psi |
| Compressive Yield Strength | 18,000 psi |
| Hardness | 90 Shore D |
| Shrinkage | .002 in/in |
| Co-efficient of Thermal Expansion | 1.51 x 106 in/inºF |